$

Rectangle Dinner Plate Technique

$0.00
  • Technique
    • Brand: Mayco Specials
    • Product Code: MB1292-Technique
    • Availability: In Stock

    Description

    MB1292 Rectangle Dinner Plate in Ceramic Cone 04 Bisque By Mayco Bisque

    12.75 L x 9.25 W 

    This item is unpainted.
    You are purchasing an unfinished, Ready to Paint, Piece of Ceramic Pottery

    Love Tray

    Products Used
    Bisque
    • MB-1292 Rectangle Dinner Plate
    Color
    • SC-1 Pink -A-Boo
    • SC-74 Hot Tamale
    • SC-95 Pinkie Swear
    • FN-001 White
    • FN-004 Red
    Decorating Accessories
    • CB-106 #6 Script Liner
    • CB-110 #10/0 Liner
    • CB-604 #4 Soft Fan
    • BT-910 Synthetic Sponge

    Additional Materials

    Instructions

    1. Begin with properly fired shelf cone 04 bisque.  Moisten a clean sponge and wipe bisque to remove any dust.
    2. Apply ½” Masking to the outer edge of the center of the plate.
    3. Using a CB-604 #4 Soft Fan, apply 2 coats of FN-001 White to the center area of the plate. Allow to dry.
    4. Cut out the word love and the heart patterns. With water attach the word love. Blot with a paper towel to absorb any excess water.
    5. Place the hearts to the center of the plate and trace around with a pencil, also trace around the word love.
    6. Using a CB-106 #6 Script Liner, apply 3 coats of SC-74 Hot Tamale to the hearts.
    7. Remove the paper word love.
    8. With a pencil, sketch a 1/8” border to the inside of the word love.
    9. Using a CB-110 #10/0 Liner, apply 2-3 coats of SC-95 Pinkie Swear to the border.
    10. Apply ½” Masking Tape to the edge of the center area
    11. Using a CB-604 #4 Soft Fan, apply 3 coats of SC-1 Pink-A-Boo to the outer edge of the plate. Allow to dry.
    12. With the heart paper punches punch out 4 larger hearts for the corners of the plate and 12 smaller hearts for in between. Apply the negative punch-outs to the edge of the plate with water. Blot with a paper towel to absorb any excess water.
    13. Using a CB-106 #6 Script Liner, apply 3 coats of SC-74 Hot Tamale to the hearts.
    14. Remove the paper cut out hearts.
    15. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-004 Red to the back of the plate.  Allow to dry.
    16. Stilt and fire to shelf cone 06/05.


    Reviews (0)

    Write a review

    Note: HTML is not translated!
        Bad           Good