Coupe Pasta Bowl - Case of 6

  • Mix n Match Duncan Case Discount
  • 3 or more $39.84 6 or more $34.86


    21428 Coupe Pasta Bowl in Ceramic Cone 04 Bisque by Duncan

    All of our bisque is fired to a cone 04 and is ready to paint.

    Dimensions:  7.75 x 7.75 x 2.5

    Case of 6

    This item is unpainted.

    You are purchasing an unfinished, Ready to Paint, Piece of Ceramic Pottery

    Rustic Blooms Medallion Bowl

    Combine Duncan® French Dimensions® with luxurious color from Duncan® Designer Glazes® for a piece that stands out with style. Earthy shades and tons of texture make this bowl a beautiful work of art.


    1. Wipe ware with damp sponge to remove bisque dust.

    2. Using a pencil and a soft tape measure, measure and mark the bowl into 16 equal sections around the rim.

    3. Use the tape measure to stretch from one mark on the rim to the opposite mark on the other side of the rim and lightly trace along the line from point to point. Continue this process, dividing the bowl into pie shapes. This will help with the even placement of each section as shown in the photo.

    4. Next mark bands around the inside of the bowl to create the divisions for each layer of petals. Finish the medallion pattern by lightly sketching in the petal shapes and some design details. Use a soft towel to lightly clean the inside of the bowl of any excess pencil markings or dust.

    5. Using the bamboo skewers, thoroughly mix each of the French Dimensions colors to ensure that the color is smooth and even throughout the bottle. Replace the tip and cap and shake the product down to the tip of the bottle.

    6. Using the photo as inspiration, begin in the center with each French Dimensions color as shown and use the product to outline the pencil lines to create the entire dimensional pattern. Work from the center of the bowl out and continue one row all around until complete before moving on to the next row of petals and details. Check the pattern carefully that everything is neat and that all the details and design work has been added to the pattern. Feel free to add as many details as desired to embellish the design. Allow the French Dimensions to dry thoroughly.

    7. Before beginning to glaze, shake and mix each of the Designer Glazes thoroughly to the proper consistency. Thin with a small amount of water if needed to allow for a nice smooth, flowing coat of each color.

    8. Using the No. 6 Round or the Fan Glaze brush as needed, for the first coat, be sure that the glaze is a slightly thinner consistency so that the glaze will flow right up to and over the French Dimensions for good adhesion to the dimensional product. Continue to apply three coats to each section as shown, working the glaze up next to and over the French Dimensions as needed for each petal and detail. Allow each coat of glaze to dry thoroughly. Follow color placement as shown in the photo.

    9. Apply three flowing coats of Carbon Chiffon to the backside of the bowl, allowing each coat to dry thoroughly.

    10. Check the piece carefully for any misplaced color and touch up as needed.

    11. Stilt the bowl and fire to witness cone 06. Use a stilt stone to remove the stilt marks after firing.

    What you need:

    21428 Coupe Pasta Bowl

    Duncan® Designer Glazes®

         DG 206 Forest Flannel 

         DG 203 Carbon Chiffon 

         DG 205 Crimson Chenille 

         DG 204 Natural Linen 

    Signature Brushes

         SB 807 No. 6 Fan Glaze 

         SB 806 No. 6 Round 

    Duncan® French Dimensions™

         FD 254 Black Licorice (80304)

         FD 258 Pure White (80305)

         FD 278 French Really Red (21416)

         FD 271 French Kiwi 


        Container for water


        Soft tape measure

        Potter's sponge

        Foil or foam plate for palette

        Bamboo skewers

    Reviews (0)

    Write a review

    Note: HTML is not translated!
        Bad           Good