Chip & Dip- 1-Piece - Case of 6
- Brand: Duncan Bisque - Case
- Product Code: 21449-C-6
- Availability: In Stock
21449 1-Piece Chip & Dip - in Ceramic Cone 04 Bisque By Duncan
All of our bisque is fired to a cone 04 and is ready to paint.
Case of 6
Dimensions: 12 x 12 x 2
This item is unpainted.
You are purchasing an unfinished, Ready to Paint, Piece of Ceramic Pottery
Nautical Nachos Chip and Dip Plate
Ahoy snackers! Set a creative course to make a party saving snack dish using the Duncan® Oh Four® chip and dip plate! Add nautical style with bold stripes and solidly placed anchor sunk right in the middle of the dip area.
Wipe plate with damp sponge to remove bisque dust.
Trace anchor pattern on tracing paper and transfer pattern to center, dip area.
From top of plate, measure approximately 1” down from edge of plate. Repeat on opposite side. Run a piece of tape across.
Lay ruler on edge of plate and begin measuring 2” followed by 1½” all the way to the bottom. Repeat on the opposite side.
Lay tape across leaving the 1½” spaces open. Push down the tape into the grooves so the paint will not seep under.
Brush or sponge three coats Bright Delft into the open spaces. Let dry. Remove tape.
Using Liner, carefully outline anchor with Neon Red. Fill in remaining dip area surrounding anchor with three coats Neon Red. Let dry.
If desired, paint center section on back of plate with three coats Neon Red. Let dry thoroughly.
Brush two coats Pure Brilliance to anchor and white, bisque stripes. Repeat with back of plate. Let dry thoroughly.
Brush a light coat of Pure Brilliance to entire plate. Let dry.
Stilt on kiln shelf and fire to cone 06.
What you need:
Dinnerware Bisque Designs
21449 1-piece Chip & Dip 12 x 12 x 2 (21449)
Duncan® Concepts® Underglazes for Bisque
CN 112 Bright Delft
CN 507 Neon Red
SB 802 No. 1 Liner
SB 806 No. 6 Round
SB 807 No. 6 Fan Glaze
Container for water
Foil or foam plate for palette